Public Types
enum	CutType : byte
	Paper cut type. More...

enum	EjectType : byte
	Eject paper type. More...

enum	PaperAlignType : byte
	Paper alignment type. More...

enum	CashDrawerType : byte
	Cash Drawer connector pin. More...

enum	CommunicationPortType : byte
	Communication port. More...

enum	TrPrintMode : byte
	Transaction Print. More...

enum	DevCounterType : byte
	Counter types supported by the devices. More...

Public Member Functions
void	Terminate ()
	Close the communication with the device.

short	GetInfoPrinterId ()
	Get the Printer ID.

String	GetInfoFirmwareVersion ()
	Get the Firmware Version.

String	GetInfoDeviceModel ()
	Get the Device Model.

CommunicationPortType	GetCapCommPortType ()
	Get the type of communication port used by the device.

Boolean	GetCapPrintAvailable ()
	Get if this device supports print functions.

UInt32	GetCapPrinterResolution ()
	Get the print resolution of this device.

UInt32	GetCapPrintWidth ()
	Get the print width of this device.

void	SetCapPrintWidth (UInt32 uiNewPrintWidth)
	Set the print width of this device.

String[]	GetCapCodepagesList ()
	Get the list of all the codepages supported by the library / device.

void	SetVirtualPaperEndLimit (UInt32 uiVirtualPaperEndLimitCm)
	Set the Virtual Paper End limit of this device.

bool	PrinterIsReady ()
	Check if the device is ready.

PrinterStatus	GetPrinterFullStatus ()
	Get the status of this device.

void	PrintText (String strText, bool bAddLF=false)
	Print text on a printer.

void	PrintText (String strText, PrintFontSettings printFont, bool bAddLF=false)
	Print text on a printer.

void	PrintImageFromPath (String strImageFilePath, PrintImageSettings printImage)
	Print image file from path.

void	PrintRawImage (PrintImageSettings.RAWBitDepth bits, byte[] pRawBuffer, int dwWidth, int dwHeight, PrintImageSettings printImage)
	Print RAW image buffer.

void	PrintBitmapImage (Bitmap bmpImage, PrintImageSettings printImage)
	Print Bitmap image.

void	PrintBarcode (String strBrcText, PrintBarcodeSettings printBarcode)
	Print barcode file from String.

void	PrintBarcode (byte[] bBrcBuffer, PrintBarcodeSettings printBarcode)
	Print barcode file from buffer.

void	SetIgnoreWhiteImages (bool bIgnore)
	Set if ignore, or not, the white Images.

void	SetGrModeToBlackWhite (PrintImageSettings.ImageGRMode imgGrModeType, byte bThreshold)
	Set the graphic conversion mode to Black/White and, if necessary, the threshold.

void	SetPageModeToRoll (bool bRollMode)
	Set the page mode print to Roll mode.

void	SetGraphicsTopMargin (UInt32 uiTopMargin)
	Set the top margin added to the graphics print.

UInt32	GetGraphicsTopMargin ()
	Get the top margin added to the graphics print.

UInt32	CommGetReadTimeout ()
	Get the read timeout of the communication port of this device.

void	CommSetReadTimeout (UInt32 uiRTimeout)
	Set the read timeout of the communication port of this device.

UInt32	CommGetWriteTimeout ()
	Get the write timeout of the communication port of this device.

void	CommSetWriteTimeout (UInt32 uiWTimeout)
	Set the write timeout of the communication port of this device.

void	CommClearReadBuffer ()
	Clean the read buffer of the communication port of this device.

void	CommClearWriteBuffer ()
	Clean the write buffer of the communication port of this device.

byte[]	CommRead ()
	Direct read from communication port of this device.

int	CommWrite (byte[] bDataToWrite)
	Direct write to communication port of this device.

void	TransactionPrint (TrPrintMode tpMode)
	Manage the Transaction Print of the device.

void	Feed (UInt32 nFeeds)
	Send line feed commands to the device.

void	Cut (CuCustomWndDevice.CutType cuttype)
	Send cut command to the device.

void	Eject (CuCustomWndDevice.EjectType ejtype)
	Send eject command to the device.

void	EjectWithTimeout (CuCustomWndDevice.EjectType ejtype, UInt32 timeOutms)
	Send eject with a timeout command to the device.

void	Present (UInt32 presentMM)
	Send presentation command to the device.

void	Align (CuCustomWndDevice.PaperAlignType aligntype)
	Send align command to the device.

void	OpenCashDrawer (CuCustomWndDevice.CashDrawerType cashDrawertype, UInt32 timeOn, UInt32 timeOff)
	Send open cash drawer command to the device.

void	ResetDevice (bool bWaitReset)
	Reset the device.

void	DeletePrinterInternalQueue ()
	Clear / Delete the internal queue of the device.

int	GetCounter (DevCounterType devCounter)
	Get a device counter.

override string	ToString ()

Detailed Description

Class to use to communciate with the device

Member Enumeration Documentation

◆ CashDrawerType

enum Custom.CuCustomWndAPI.CuCustomWndDevice.CashDrawerType : byte

Cash Drawer connector pin.

Enumerator
CASH_DRAWER_1	Indicates that the cash drawer selected is DRW1
CASH_DRAWER_2	Indicates that the cash drawer selected is DRW2

◆ CommunicationPortType

enum Custom.CuCustomWndAPI.CuCustomWndDevice.CommunicationPortType : byte

Communication port.

Enumerator
COMMTYPE_USB	Usb
COMMTYPE_COM	Serial / Com
COMMTYPE_NET	Net / Ethernet / Wifi
COMMTYPE_OTHER	Unknown

◆ CutType

enum Custom.CuCustomWndAPI.CuCustomWndDevice.CutType : byte

Paper cut type.

Enumerator
CUT_TOTAL	Indicates to perform a Total Cut
CUT_PARTIAL	Indicates to perform a Partial Cut

◆ DevCounterType

enum Custom.CuCustomWndAPI.CuCustomWndDevice.DevCounterType : byte

Counter types supported by the devices.

Enumerator
HEAD_TEMPERATURE	If supported by the device, this counter is the temperature, in 0.1°C, of the printer Head (for e.g. a value of 255 is a temperature of 25.5°C)
NUM_POWERON	If supported by the device, this counter is the number of power on
POWER_VOLTAGE	If supported by the device, this counter is the power voltage, in 0.1V (for e.g. a value of 241 is a power voltage of 24.1V)
NUM_CUTS	If supported by the device, this counter is the number of "cuts" performed
NUM_RETRACT	If supported by the device, this counter is the number of "retract" performed
TOTAL_PAPER_REM	If supported by the device, this counter is the total paper remaining in the roll (when near paper end is segnaled) in cm
PAPER_PRINTED	If supported by the device, this counter is the total of paper printed in cm
NUM_COVER_OPEN	If supported by the device, this counter is the number of "cover open"

◆ EjectType

enum Custom.CuCustomWndAPI.CuCustomWndDevice.EjectType : byte

Eject paper type.

Enumerator
EJ_EJECT	Indicates to perform a Eject
EJ_RETRACT	Indicates to perform a Retract

◆ PaperAlignType

enum Custom.CuCustomWndAPI.CuCustomWndDevice.PaperAlignType : byte

Paper alignment type.

Enumerator
PALIGN_PRINT	Indicates to perform a Paper alignment under the printing line
PALIGN_CUT	Indicates to perform a Paper alignment under the cutting line

◆ TrPrintMode

enum Custom.CuCustomWndAPI.CuCustomWndDevice.TrPrintMode : byte

Transaction Print.

Enumerator
TP_TRANSACTION_REC	Indicates the library will buffer the print data until the function is called with the TP_TRANSACTION_STOP or TP_TRANSACTION_PRINT
TP_TRANSACTION_STOP	Indicates the library stop to store the print data
TP_TRANSACTION_PRINT	Indicates the library stop to store and prints all the print data stored
TP_TRANSACTION_CLEAN	Indicates the library cleans all the print data stored

Member Function Documentation

◆ Align()

void Custom.CuCustomWndAPI.CuCustomWndDevice.Align ( CuCustomWndDevice::PaperAlignType aligntype )

inline

Send align command to the device.

Parameters

aligntype the CuCustomWndDevice.PaperAlignType type to send to the device.

Exceptions

CuCustomWndAPIWrapException

◆ CommClearReadBuffer()

void Custom.CuCustomWndAPI.CuCustomWndDevice.CommClearReadBuffer ( )

inline

Clean the read buffer of the communication port of this device.

Exceptions

CuCustomWndAPIWrapException

◆ CommClearWriteBuffer()

void Custom.CuCustomWndAPI.CuCustomWndDevice.CommClearWriteBuffer ( )

inline

Clean the write buffer of the communication port of this device.

Exceptions

CuCustomWndAPIWrapException

◆ CommGetReadTimeout()

UInt32 Custom.CuCustomWndAPI.CuCustomWndDevice.CommGetReadTimeout ( )

inline

Get the read timeout of the communication port of this device.

Returns: the number that is the read timeout (msec), for the communication port, of this device.

Exceptions

CuCustomWndAPIWrapException

◆ CommGetWriteTimeout()

UInt32 Custom.CuCustomWndAPI.CuCustomWndDevice.CommGetWriteTimeout ( )

inline

Get the write timeout of the communication port of this device.

Returns: the number that is the write timeout (msec), for the communication port, of this device.

Exceptions

CuCustomWndAPIWrapException

◆ CommRead()

byte[] Custom.CuCustomWndAPI.CuCustomWndDevice.CommRead ( )

inline

Direct read from communication port of this device.

Returns: buffer with the received data.

Exceptions

CuCustomWndAPIWrapException

◆ CommSetReadTimeout()

void Custom.CuCustomWndAPI.CuCustomWndDevice.CommSetReadTimeout ( UInt32 uiRTimeout )

inline

Set the read timeout of the communication port of this device.

Parameters

uiRTimeout the number that is the new read timeout (msec), for the communication port, of this device.

Exceptions

CuCustomWndAPIWrapException

◆ CommSetWriteTimeout()

void Custom.CuCustomWndAPI.CuCustomWndDevice.CommSetWriteTimeout ( UInt32 uiWTimeout )

inline

Set the write timeout of the communication port of this device.

Parameters

uiWTimeout the number that is the new write timeout (msec), for the communication port, of this device.

Exceptions

CuCustomWndAPIWrapException

◆ CommWrite()

int Custom.CuCustomWndAPI.CuCustomWndDevice.CommWrite ( byte[] bDataToWrite )

inline

Direct write to communication port of this device.

Parameters

bDataToWrite buffer to send.

Returns: the value of the number of sended bytes.

Exceptions

CuCustomWndAPIWrapException

◆ Cut()

void Custom.CuCustomWndAPI.CuCustomWndDevice.Cut ( CuCustomWndDevice::CutType cuttype )

inline

Send cut command to the device.

Parameters

cuttype the CuCustomWndDevice.CutType type to send to the device.

Exceptions

CuCustomWndAPIWrapException

◆ DeletePrinterInternalQueue()

void Custom.CuCustomWndAPI.CuCustomWndDevice.DeletePrinterInternalQueue ( )

inline

Clear / Delete the internal queue of the device.

Exceptions

CuCustomWndAPIWrapException

◆ Eject()

void Custom.CuCustomWndAPI.CuCustomWndDevice.Eject ( CuCustomWndDevice::EjectType ejtype )

inline

Send eject command to the device.

Parameters

ejtype the CuCustomWndDevice.EjectType type to send to the device.

Exceptions

CuCustomWndAPIWrapException

◆ EjectWithTimeout()

void Custom.CuCustomWndAPI.CuCustomWndDevice.EjectWithTimeout	(	CuCustomWndDevice::EjectType	ejtype,
		UInt32	timeOutms
	)

inline

Send eject with a timeout command to the device.

Parameters

ejtype the CuCustomWndDevice.EjectType type to send to the device.

Parameters

timeOutms the time in milliseconds after which the movement is performed.

◆ Feed()

void Custom.CuCustomWndAPI.CuCustomWndDevice.Feed ( UInt32 nFeeds )

inline

Send line feed commands to the device.

Parameters

nFeeds The number of line feed to send to the device.

Exceptions

CuCustomWndAPIWrapException

◆ GetCapCodepagesList()

String[] Custom.CuCustomWndAPI.CuCustomWndDevice.GetCapCodepagesList ( )

inline

Get the list of all the codepages supported by the library / device.

Returns: string array with the codepages list.

Exceptions

CuCustomWndAPIWrapException

◆ GetCapCommPortType()

CommunicationPortType Custom.CuCustomWndAPI.CuCustomWndDevice.GetCapCommPortType ( )

inline

Get the type of communication port used by the device.

Returns: A CommunicationPortType that contains the communication port type.

Exceptions

CuCustomWndAPIWrapException

◆ GetCapPrintAvailable()

Boolean Custom.CuCustomWndAPI.CuCustomWndDevice.GetCapPrintAvailable ( )

inline

Get if this device supports print functions.

Returns: A boolean value to know if this device supports print functions.

Exceptions

CuCustomWndAPIWrapException

◆ GetCapPrinterResolution()

UInt32 Custom.CuCustomWndAPI.CuCustomWndDevice.GetCapPrinterResolution ( )

inline

Get the print resolution of this device.

Returns: A number that is the print resolution.

Exceptions

CuCustomWndAPIWrapException

◆ GetCapPrintWidth()

UInt32 Custom.CuCustomWndAPI.CuCustomWndDevice.GetCapPrintWidth ( )

inline

Get the print width of this device.

Returns: A number that is the print width (dots) of this device.

Exceptions

CuCustomWndAPIWrapException

◆ GetCounter()

int Custom.CuCustomWndAPI.CuCustomWndDevice.GetCounter ( DevCounterType devCounter )

inline

Get a device counter.

Parameters

devCounter The DevCounter that identify the counter to get from the device.

Exceptions

CuCustomWndAPIWrapException

◆ GetGraphicsTopMargin()

UInt32 Custom.CuCustomWndAPI.CuCustomWndDevice.GetGraphicsTopMargin ( )

inline

Get the top margin added to the graphics print.

Returns: The fixed top margin (dots) added to every print in graphics mode (default is 16).

Exceptions

CuCustomWndAPIWrapException

◆ GetInfoDeviceModel()

String Custom.CuCustomWndAPI.CuCustomWndDevice.GetInfoDeviceModel ( )

inline

Get the Device Model.

Returns: A string containing the model of this device.

Exceptions

CuCustomWndAPIWrapException

◆ GetInfoFirmwareVersion()

String Custom.CuCustomWndAPI.CuCustomWndDevice.GetInfoFirmwareVersion ( )

inline

Get the Firmware Version.

Returns: A string containing the Firmware release of this device.

Exceptions

CuCustomWndAPIWrapException

◆ GetInfoPrinterId()

short Custom.CuCustomWndAPI.CuCustomWndDevice.GetInfoPrinterId ( )

inline

Get the Printer ID.

Returns: A WORD that containing the Printer ID.

Exceptions

CuCustomWndAPIWrapException

◆ GetPrinterFullStatus()

PrinterStatus Custom.CuCustomWndAPI.CuCustomWndDevice.GetPrinterFullStatus ( )

inline

Get the status of this device.

Returns: A PrinterStatus that contains the printer status.

Exceptions

CuCustomWndAPIWrapException

◆ OpenCashDrawer()

void Custom.CuCustomWndAPI.CuCustomWndDevice.OpenCashDrawer	(	CuCustomWndDevice::CashDrawerType	cashDrawertype,
		UInt32	timeOn,
		UInt32	timeOff
	)

inline

Send open cash drawer command to the device.

Parameters

cashDrawertype	the CuCustomWndDevice.CashDrawerType type to send to the device.
timeOn	the pulse ON time in milliseconds
timeOff	the pulse OFF time in milliseconds

◆ Present()

void Custom.CuCustomWndAPI.CuCustomWndDevice.Present ( UInt32 presentMM )

inline

Send presentation command to the device.

Parameters

presentMM the value (mm) of the presentation to send to the device.

Exceptions

CuCustomWndAPIWrapException

◆ PrintBarcode() [1/2]

void Custom.CuCustomWndAPI.CuCustomWndDevice.PrintBarcode	(	byte[]	bBrcBuffer,
		PrintBarcodeSettings	printBarcode
	)

inline

Print barcode file from buffer.

Parameters

bBrcBuffer The buffer to print into barcode.

Parameters

printBarcode the PrintBarcodeSettings with all the parameters / Attributes to use to print the barcode.

Exceptions

CuCustomWndAPIWrapException

◆ PrintBarcode() [2/2]

void Custom.CuCustomWndAPI.CuCustomWndDevice.PrintBarcode	(	String	strBrcText,
		PrintBarcodeSettings	printBarcode
	)

inline

Print barcode file from String.

Parameters

strBrcText The text string to print into barcode.

Parameters

printBarcode the PrintBarcodeSettings with all the parameters / Attributes to use to print the barcode.

Exceptions

CuCustomWndAPIWrapException

◆ PrintBitmapImage()

void Custom.CuCustomWndAPI.CuCustomWndDevice.PrintBitmapImage	(	Bitmap	bmpImage,
		PrintImageSettings	printImage
	)

inline

Print Bitmap image.

Parameters

bmpImage the bitmap to print.

Parameters

printImage The PrintImageSettings with all the parameters / Attributes to use to print the image.

Exceptions

CuCustomWndAPIWrapException

◆ PrinterIsReady()

bool Custom.CuCustomWndAPI.CuCustomWndDevice.PrinterIsReady ( )

inline

Check if the device is ready.

Returns: A boolean value that is true if the communication with the device is ok.

Exceptions

CuCustomWndAPIWrapException

◆ PrintImageFromPath()

void Custom.CuCustomWndAPI.CuCustomWndDevice.PrintImageFromPath	(	String	strImageFilePath,
		PrintImageSettings	printImage
	)

inline

Print image file from path.

Parameters

strImageFilePath string with the image file path.

Parameters

printImage The PrintImageSettings with all the parameters / Attributes to use to print the image.

Note

The file formats supported are BMP, GIF, JPEG, PNG, TIFF, Exif, WMF, and EMF.

Exceptions

CuCustomWndAPIWrapException

◆ PrintRawImage()

void Custom.CuCustomWndAPI.CuCustomWndDevice.PrintRawImage	(	PrintImageSettings::RAWBitDepth	bits,
		byte[]	pRawBuffer,
		int	dwWidth,
		int	dwHeight,
		PrintImageSettings	printImage
	)

inline

Print RAW image buffer.

Parameters

bits	the bit deph of the RAW data.

Parameters

pRawBuffer RAW buffer to print.

Parameters

dwWidth width (pixels/dots) of the of RAW image.

Parameters

dwHeight height (pixels/dots) of the of RAW image.

Parameters

printImage The PrintImageSettings with all the parameters / Attributes to use to print the image.

Note

For a correct Monochromatic RAW 1 bit buffer, the size must be always ((width in terms of bytes per row) * Height). About the colors palette, if the bit is 0 it will be a black dot and if if the bit is 1 it will be a white dot.

For a correct Greyscale RAW 8 bit buffer, the size must be always (Width * Height). About the colors palette, the byte 0x00 is the black and the 0xFF is the white.

For a correct RGB RAW 24 bit buffer, the size must be always (Width * Height * 3). About the colors palette, the color 0x000000 is the black and the 0xFFFFFF is the white.

Exceptions

CuCustomWndAPIWrapException

◆ PrintText() [1/2]

void Custom.CuCustomWndAPI.CuCustomWndDevice.PrintText	(	String	strText,
		bool	bAddLF = `false`
	)

inline

Print text on a printer.

Parameters

strText The text string to print.

Parameters

bAddLF The boolean that is TRUE if must be send a line feed command after the text.

Exceptions

CuCustomWndAPIWrapException

◆ PrintText() [2/2]

void Custom.CuCustomWndAPI.CuCustomWndDevice.PrintText	(	String	strText,
		PrintFontSettings	printFont,
		bool	bAddLF = `false`
	)

inline

Print text on a printer.

Parameters

strText The text string to print.

Parameters

printFont The PrintFontSettings with all the parameters / Attributes to use to print the text.

Parameters

bAddLF The boolean that is TRUE if must be send a line feed command after the text.

Exceptions

CuCustomWndAPIWrapException

◆ ResetDevice()

void Custom.CuCustomWndAPI.CuCustomWndDevice.ResetDevice ( bool bWaitReset )

inline

Reset the device.

Parameters

bWaitReset The boolean that is TRUE if must be wait the reset and the re-open before exit. If bWaitReset is FALSE, must be close and re-open the device communcation before continue.

Exceptions

CuCustomWndAPIWrapException

◆ SetCapPrintWidth()

void Custom.CuCustomWndAPI.CuCustomWndDevice.SetCapPrintWidth ( UInt32 uiNewPrintWidth )

inline

Set the print width of this device.

Parameters

uiNewPrintWidth A number that is the new print width (dots) of this device.

Exceptions

CuCustomWndAPIWrapException

◆ SetGraphicsTopMargin()

void Custom.CuCustomWndAPI.CuCustomWndDevice.SetGraphicsTopMargin ( UInt32 uiTopMargin )

inline

Set the top margin added to the graphics print.

Parameters

uiTopMargin The fixed top margin (dots) added to every print in graphics mode (default is 16).

Exceptions

CuCustomWndAPIWrapException

◆ SetGrModeToBlackWhite()

void Custom.CuCustomWndAPI.CuCustomWndDevice.SetGrModeToBlackWhite	(	PrintImageSettings::ImageGRMode	imgGrModeType,
		byte	bThreshold
	)

inline

Set the graphic conversion mode to Black/White and, if necessary, the threshold.

Parameters

imgGrModeType the PrintImageSettings.ImageGRMode conversion to black / white mode.

Parameters

bThreshold the threshold value to use (only for PrintImageSettings.ImageGRMode.IMAGE_GRMODE_THRESHOLD mode).

Exceptions

CuCustomWndAPIWrapException

◆ SetIgnoreWhiteImages()

void Custom.CuCustomWndAPI.CuCustomWndDevice.SetIgnoreWhiteImages ( bool bIgnore )

inline

Set if ignore, or not, the white Images.

Parameters

bIgnore The boolean that is TRUE when a totally white Image must be ignored and not print (default is FALSE).

Exceptions

CuCustomWndAPIWrapException

◆ SetPageModeToRoll()

void Custom.CuCustomWndAPI.CuCustomWndDevice.SetPageModeToRoll ( bool bRollMode )

inline

Set the page mode print to Roll mode.

Parameters

bRollMode The boolean that is TRUE when the printer prints until the last not white line (default is FALSE).

Exceptions

CuCustomWndAPIWrapException

◆ SetVirtualPaperEndLimit()

void Custom.CuCustomWndAPI.CuCustomWndDevice.SetVirtualPaperEndLimit ( UInt32 uiVirtualPaperEndLimitCm )

inline

Set the Virtual Paper End limit of this device.

Parameters

uiVirtualPaperEndLimitCm A number that will be the virtual paper end limit, expressed in cm, of this device (for e.g. "1500" is to set 15m).

Exceptions

CuCustomWndAPIWrapException

◆ Terminate()

void Custom.CuCustomWndAPI.CuCustomWndDevice.Terminate ( )

inline

Close the communication with the device.

Exceptions

CuCustomWndAPIWrapException

◆ ToString()

override string Custom.CuCustomWndAPI.CuCustomWndDevice.ToString ( )

inline

Convert the deviceID to a String

◆ TransactionPrint()

void Custom.CuCustomWndAPI.CuCustomWndDevice.TransactionPrint ( TrPrintMode tpMode )

inline

Manage the Transaction Print of the device.

Parameters

tpMode Transaction control.

Exceptions

CuCustomWndAPIWrapException

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

◆ CashDrawerType

◆ CommunicationPortType

◆ CutType

◆ DevCounterType

◆ EjectType

◆ PaperAlignType

◆ TrPrintMode

Member Function Documentation

◆ Align()

◆ CommClearReadBuffer()

◆ CommClearWriteBuffer()

◆ CommGetReadTimeout()

◆ CommGetWriteTimeout()

◆ CommRead()

◆ CommSetReadTimeout()

◆ CommSetWriteTimeout()

◆ CommWrite()

◆ Cut()

◆ DeletePrinterInternalQueue()

◆ Eject()

◆ EjectWithTimeout()

◆ Feed()

◆ GetCapCodepagesList()

◆ GetCapCommPortType()

◆ GetCapPrintAvailable()

◆ GetCapPrinterResolution()

◆ GetCapPrintWidth()

◆ GetCounter()

◆ GetGraphicsTopMargin()

◆ GetInfoDeviceModel()

◆ GetInfoFirmwareVersion()

◆ GetInfoPrinterId()

◆ GetPrinterFullStatus()

◆ OpenCashDrawer()

◆ Present()

◆ PrintBarcode() [1/2]

◆ PrintBarcode() [2/2]

◆ PrintBitmapImage()

◆ PrinterIsReady()

◆ PrintImageFromPath()

◆ PrintRawImage()

◆ PrintText() [1/2]

◆ PrintText() [2/2]

◆ ResetDevice()

◆ SetCapPrintWidth()

◆ SetGraphicsTopMargin()

◆ SetGrModeToBlackWhite()

◆ SetIgnoreWhiteImages()

◆ SetPageModeToRoll()

◆ SetVirtualPaperEndLimit()

◆ Terminate()

◆ ToString()

◆ TransactionPrint()